Original topic:

Fingerprint senson stopped working

(Topic created on: 09-23-2023 12:16 AM)
1350 Views
Shack7
Active Level 1
Options
Galaxy S
Since the recent update on my s20 fe 5g the fingerprint sensor suddenly stopped working and after countless restarts still no luck.
It says fingerprint sensor not responding, please try again later and in settings it says fingerprint sensor not working and if this keeps happening, restart your phone.
11 Comments
Devv_007
Expert Level 5
Galaxy S
Open Dialer and Dial *#0*# >Sensors>Fingerprint Test>Normal Scan and update here.
Shack7
Active Level 1
Galaxy S
"NA"
0 Likes
Devv_007
Expert Level 5
Galaxy S
Hardware issue you need to visit service center and check it there.
0 Likes
Shack7
Active Level 1
Galaxy S
Could be but without any water interference or drop is surprising
Devv_007
Expert Level 5
Galaxy S
Yes but electric component can fail anytime.
0 Likes
piyussh07
Expert Level 5
Galaxy S
Sed 🥲
cs_member8
Moderator
Moderator
Options
Galaxy S

Dear Samsung Member,

Greetings from Samsung Customer Support!

As per your concern, we would request you to kindly perform the following steps to resolve your issue.

If your fingerprints fail to unlock the phone, and you are asked to type in the lock screen password, follow the same steps to resolve the problem:

Have you checked your fingers?
Ensure that your fingers are clean and dry.
Note:
If the skin on your fingertips is peeling or cracking, or your fingerprint is difficult to capture, the fingerprint ID on your phone may not work.
If your fingerprints fail to unlock the phone while the phone is recharging, remove it from the charger and try again. If you are charging the phone with a charger and data cable from other brands when you use fingerprints to unlock the phone, they may interfere with the fingerprint sensor and cause the recognition to fail.

Clean the fingerprint sensor with a soft cloth. Make sure the fingerprint sensor is dry and free from any debris that may cause the sensor to be unable to recognize the fingerprint.

Please remove the current fingerprint and set up the fingerprint again. When you touch the sensor to set up a fingerprint, make sure you set the entire fingerprint, including the outer area of your fingertip. Setting the entire fingerprint area enables successful fingerprint recognition with any grip.

Please follow the below steps:
How to remove Fingerprint:
Tap on Settings >Biometrics and Security > Fingerprints> Fingerprint1> Remove> Tap on Remove again to confirm.

How to Set up Fingerprint:
Tap on Settings> Biometrics and Security>Fingerprints Tap on Add Fingerprint> Scan your fingerprint>Place your finger on the sensor, then lift it off when you feel a vibration> Continue >Reposition your finger each time to capture the edge of your fingerprint> Done.>Fingerprint added successfully.

You can check the device in safe mode and for the same mode you can tap on the given link. https://www.samsung.com/in/support/mobile-devices/safe-mode-on-samsung-phones/

Update device software (If available): Settings > Software update > Download and install > Checking for software update > Software update available > Download > Downloading updates > Install now.

You can reset your device by following the steps from the below link.
https://www.samsung.com/in/support/mobile-devices/samsung-galaxy-mobile-how-to-perform-a-factory-res...

In case the issue still occurs. Please visit the service center for a physical inspection of your device. You can locate your nearest service center with this given link: https://www.samsung.com/in/support/service-center/

Warm Regards,
Samsung Customer Support

0 Likes
susnatab
Active Level 3
Galaxy S
Same here, my fingerprint stopped working in the August, i visited service center where they charged 1386 Rs/- to fix this......😡😡😡
0 Likes
Shack7
Active Level 1
Galaxy S
This is wrong. Currently using smart lock will get it fixed soon though.
0 Likes