Original topic:

Phone not charging | analog usb devices aren't supported while charging

(Topic created on: Tuesday)
34 Views
AnasAdil
Beginner Level 2
Options
Galaxy S
My S24 ultra phone stopped charging and throws an error : analog usb devices aren't supported while charging

However, I started using the other Samsung cable which was provided with the phone. But it is not fast charging. I tried multiple settings to reset battery settings, turning off/on fast charging and even tried connecting with multiple adapters and cables, but no luck!!

Any suggestions would be of great help!!

#Samsungindia #Samsungsupport.


3 Comments
Galaxy S
Are you using original samsung charger?
0 Likes
AnasAdil
Beginner Level 2
Galaxy S
Yes, a 45W charger
0 Likes
cs_member10
Moderator
Moderator
Options
Galaxy S

Dear Samsung Member,

Greetings from Samsung Customer Support!

As per your concern, we would request you to kindly perform the following steps to resolve your issue.

● Check the charger functionality with a different device or try to charge the same device with a different charger.
Note: Kindly open Device Care from Settings > Battery > Please tap on 3dots (more option) at the top right-hand side > Please select settings> Enable fast cable charging.

● Kindly disable the battery protection mode( if enabled).

● Kindly follow the standard charging procedure. Charge the device in switch-off condition for a minimum of 10 minutes.

● Please check the back panel of your device's physical condition (Bulge, Swelling, or visible damage).

● If the physical condition is not good: Request you to turn off the device immediately and please do not try to charge or tamper with the battery also request you to visit the service center immediately.

● Update the software if available: https://www.samsung.com/in/support/mobile-devices/samsung-galaxy-smartphone-how-to-update-software/

● You can reset your device by following the steps.
1. Kindly create a data backup of your device via the SMART switch mobile application or http://www.samsung.com/in/support/smartswitch pc suite.
2. Remember the Google password before resetting the device because it is required during initial setup.
3. If you do not remember then advise to reset (Forgot password) his/her Google account.

Path: Settings> General Management.>Reset>Temporary cloud backup or External storage backup>After backup tab on Factory data reset to reset your device to its factory default settings.
This will erase all data, including files and downloaded apps.

In case the issue still occurs, please visit the service center for a physical inspection of your device. You can locate your nearest service center with this given link: https://www.samsung.com/in/support/service-center/

Warm Regards,
Samsung Customer Support

0 Likes