Android 10 One UI 2 For Galaxy Note 9

[SyedHabib]

OneUI 2 / Android Q Beta OTA Updates for Note9

• Disclaimer :

- This is a beta firmware, you could occur some bugs

- Before anything make a full backup, you could lose your personnal data

- In case you will want to downgrade to One UI 1 / Android Pie, your data must be wiped

Howto : make a SmartSwitch backup and flash at least november rom (CSJ1) with Odin (using CSC_OMC tar, so not HOME_CSC_OMC) or use SmartSwitch for PC/Mac to downgrade

• Requirements :

- For Note9 international exynos : SM-N960F model number

- The phone have to be on full stock N960FXXS4CSJ1/N960FOXM4CSJ1/N960FXXS4CSJ1 firmware

In Settings/About phone/Software information you should see :

- N960FXXS4CSJ1 as Baseband

- PPR1.180610.011.N960FXXS4CSJ1 as Build number

- OXM as part of the first line of Service provider SW ver.

• Download links :

-Direct Beta 1 Hotfix update link - From CSJ1 to ZSK7 firmware
http://fota-secure-dn.ospserver.net/firmware/XEU/SM-N960F/nspx/90cb3e18236d4b9394ef93f71feb0520.bin?...

- Beta 2 update link - From ZSK7 to ZSKH firmware -http://fota-secure-dn.ospserver.net/firmware/XEU/SM-N960F/nspx/34eb82c6e1b24e0f832958ad2e886811.bin?...

- Beta 3 update link - http://fota-secure-dn.ospserver.net/firmware/XEU/SM-N960F/nspx/d1fe894778de479c9e6baa1d552d764a.bin?...

• Installation guide :

• With ADB :

- Download and extract SDK Platform Tools
- Rename the downloaded .bin file to update.zip
- Copy it to the same folder where you previously extracted SDK Platform Tools
- Reboot your phone in recovery mode (Hold power+bixby+volume up buttons while rebooting)
- Select Apply update from ADB
- Plug the phone to your computer and start a terminal in the folder containing the update.zip and the SDK Platform Tools
- Execute the command ./adb sideload update.zip
- It will start the update and reboot your phone once it finish

• With a microSD :

- Rename the downloaded .bin file to update.zip
- Copy it to your microSD
- Reboot your phone in recovery mode (Hold power+bixby+volume up buttons while rebooting)
- Select Apply update from SD card
- Navigate and select the previously copied update.zip
- It will start the update and reboot your phone once it finish

**Source : Xda forum, SamMobile, Samfirmtool

[sensam]

is this stable version of Android 10

[SyedHabib]

beta 3 still did not have any crush issue.

[Ajverma]

any link to download full beta rom to flash from odin?

[SyedHabib]

no!