Showing results for 
Search instead for 
Did you mean: 

Original topic:

how to flash Samsung guru music 2 (b310e)

(Topic created on: 07-22-2023 09:41 AM)
Beginner Level 2
Tip & Tricks

Flashing a Samsung Guru Music 2 (B310E) involves reinstalling the phone's firmware to its original state. This process is recommended if you are facing issues like software bugs, glitches, or if the phone is stuck in a boot loop. Please note that flashing your device can potentially lead to data loss, so it's crucial to back up your important data before proceeding. Also, flashing your device may void its warranty, so make sure you understand the risks involved.

To flash your Samsung Guru Music 2 (B310E), follow these steps:

Download the Required Tools:

  • Samsung USB Drivers: Install the latest Samsung USB drivers on your computer so that it can communicate with your phone during the flashing process.
  • Odin Flash Tool: Download the Odin flash tool, which is used to install the firmware on your Samsung device.
  • Firmware File: Obtain the correct firmware file for your Samsung Guru Music 2 (B310E). Ensure that it's compatible with your device model and region.
  1. Backup Your Data: As mentioned earlier, flashing your phone will erase all data on it. So, back up your contacts, messages, media files, and other important data to an external storage device or cloud service.


    Enable USB Debugging and OEM Unlocking:

    • On your phone, go to "Settings."
    • Navigate to "Developer options."
    • Enable "USB Debugging" and "OEM Unlocking." If you can't find the Developer options, go to "About phone" and tap on the "Build number" seven times to unlock Developer options.
    • Power Off Your Phone: Completely power off your Samsung Guru Music 2 (B310E).


      Enter Download Mode:

      • Press and hold the Volume Down + Home + Power buttons simultaneously until a warning screen appears.
      • Press the Volume Up button to enter "Download Mode."
  2. Connect Your Phone to the Computer: Use a USB cable to connect your phone to the computer. Make sure the Samsung USB drivers are installed correctly.


    Run Odin and Load Firmware File:

    • Launch the Odin flash tool on your computer.
    • Click on the "AP" or "PDA" button in Odin (depending on the Odin version) and select the firmware file you downloaded earlier.
  3. Start Flashing:

    • Double-check that the "Auto Reboot" and "F. Reset Time" options are enabled in Odin.
    • Click the "Start" button to initiate the flashing process.
  4. Wait for Completion: The flashing process may take a few minutes. Once it's completed successfully, you'll see a "PASS!" message in Odin, and your phone will automatically reboot.

  5. Disconnect and Set Up Your Phone: After the phone restarts, disconnect it from the computer. Your Samsung Guru Music 2 (B310E) should now be running the fresh firmware.