Hey folks, Samsung has posted this week's new topic "Flash memory". To be honest, I didn't even knew that there is a thing known as flash memory. But thanks to Samsung members, as it came up with this subject and I got got a chance to learn something new about computer and robotics. And that's why I came up with the decision that this time won't post my "original" content as there is high risks that I might write something wrong or controversial (as I'm new with this topic and just read about it from the internet and not from any authentic book/person) and I want to readers to get confused or know something inaccurate as what we call it in hindi "अधूरा ज्ञान खतरनाक है" (Google enlgish translation- Incomplete knowledge is something very dangerous) I'm gonna copy content from different sites and try to cover it as much as possible.
Hello, I'm Ritvik Sharma; A tech curious and an undergraduate student of medicine in Udaipur Before I continue my blog further, I hope you all are doing good. Don't leave house until lockdown is called off. Wear mask, maintain hygiene and wash formites regularly. #Stayhomestaysafe
Source: Internet
What is Flash memory?
Flash memory is a non-volatile memory chip used for storage and for transfering data between a personal computer (PC) and digital devices. It has the ability to be electronically reprogrammed and erased. It is often found in USB flash drives, MP3 players, digital cameras and solid-state drives. This nonvolatile memory that erases data in units called blocks and rewrites data at the byte level.
How it works?
Flash memory architecture includes a memory array stacked with a large number of flash cells. A basic flash memory cell consists of a storage transistor with a control gate and a floating gate, which is insulated from the rest of the transistor by a thin dielectric material or oxide layer. The floating gate stores the electrical charge and controls the flow of the electrical current.
Electrons are added to or removed from the floating gate to change the storage transistor's threshold voltage. Changing the voltage affects whether a cell is programmed as a zero or a one.
Source: Internet
What are the uses of flash memory?
The Flash Memory technology has evolved into the preferred storage media for a variety of consumer and industrial devices.
Hello, I'm Ritvik Sharma; A tech curious and an undergraduate student of medicine in Udaipur Before I continue my blog further, I hope you all are doing good. Don't leave house until lockdown is called off. Wear mask, maintain hygiene and wash formites regularly. #Stayhomestaysafe
Flash memory is a non-volatile memory chip used for storage and for transfering data between a personal computer (PC) and digital devices. It has the ability to be electronically reprogrammed and erased. It is often found in USB flash drives, MP3 players, digital cameras and solid-state drives. This nonvolatile memory that erases data in units called blocks and rewrites data at the byte level.
How it works?
Flash memory architecture includes a memory array stacked with a large number of flash cells. A basic flash memory cell consists of a storage transistor with a control gate and a floating gate, which is insulated from the rest of the transistor by a thin dielectric material or oxide layer. The floating gate stores the electrical charge and controls the flow of the electrical current.
Electrons are added to or removed from the floating gate to change the storage transistor's threshold voltage. Changing the voltage affects whether a cell is programmed as a zero or a one.
The Flash Memory technology has evolved into the preferred storage media for a variety of consumer and industrial devices.
In consumer devices, Flash Memory is Widely used in:
• Notebook computers
• Digital cameras
• Personal Digital Assistants (PDAs)
• Cell phones
• Global Positioning Systems (GPS)
• Electronic musical instruments
• Solid-state music players such as
• Television set-top boxes
• MP3 players
• Pagers
• Personal computers
In Industrial Devices, Flash Memory is Widely used:
• Digital cameras
• Personal Digital Assistants (PDAs)
• Cell phones
• Global Positioning Systems (GPS)
• Electronic musical instruments
• Solid-state music players such as
• Television set-top boxes
• MP3 players
• Pagers
• Personal computers
In Industrial Devices, Flash Memory is Widely used:
• Security systems
• Military systems
• Embedded computers
• Solid-state disk drives
• Networking and communication products
• Wireless communication devices
• Retail management products (e.g., handheld scanners)
• Medical products
Types of flash memory?
There are two types of flash memory: NOR flash and NAND flash
NOR flash memory can be execute in place (XIP) memory, meaning that programs stored in NOR flash can be executed directly from the NOR flash without needing to be copied into RAM first.NOR has a high transfer efficiency and high cost effectiveness in small capacity of 1 - 4 MB, but comparatively, it has a slow write and erase speeds.
Where as NAND flash memory can be accessed much like block devices, such as hard disks. NAND is best suited to systems requiring high capacity data storage. It offers higher densities, larger capacities, and lower cost. It has faster erases, sequential writes, and sequential reads.NAND flash memory forms the core of the removable USB storage devices known as USB flash drives, as well as most memory card formats and solid-state drives available today.
NAND vs NOR flash memory
Source: Internet
Advantages of Flash memory
• Increased durability
• Maximum portability
• Plenty of storage capacity
• Faster transfer speeds
• Compatibility with many devices
• It saves data when power is OFF. It is non-volatile and hence preserve state without any power.
• Low power consumption than traditional hard disk drives
• Work more quietly than physical hard drive
Hard disks of earlier computers having only 5 mb each. Source:Internet
Limitations of flash memory?
• Flash memory cells have a limited number of write and erase cycles before failing.
• Most flash drives do not have have a write-protection mechanism
• Smaller size devices, such as flash drives make them easier to lose
• Currently costs a lot more per gigabyte than traditional hard drives for large storage capacities.
• May require a special version of a program to run on a flash-based drive to protect from prematurely wearing out the drive.
With that I would end this blog. I'm really sorry that I can't give you my orignal content.
Thank you
• Military systems
• Embedded computers
• Solid-state disk drives
• Networking and communication products
• Wireless communication devices
• Retail management products (e.g., handheld scanners)
• Medical products
Types of flash memory?
There are two types of flash memory: NOR flash and NAND flash
NOR flash memory can be execute in place (XIP) memory, meaning that programs stored in NOR flash can be executed directly from the NOR flash without needing to be copied into RAM first.NOR has a high transfer efficiency and high cost effectiveness in small capacity of 1 - 4 MB, but comparatively, it has a slow write and erase speeds.
Where as NAND flash memory can be accessed much like block devices, such as hard disks. NAND is best suited to systems requiring high capacity data storage. It offers higher densities, larger capacities, and lower cost. It has faster erases, sequential writes, and sequential reads.NAND flash memory forms the core of the removable USB storage devices known as USB flash drives, as well as most memory card formats and solid-state drives available today.
NAND vs NOR flash memory
• Increased durability
• Maximum portability
• Plenty of storage capacity
• Faster transfer speeds
• Compatibility with many devices
• It saves data when power is OFF. It is non-volatile and hence preserve state without any power.
• Low power consumption than traditional hard disk drives
• Work more quietly than physical hard drive
• Flash memory cells have a limited number of write and erase cycles before failing.
• Most flash drives do not have have a write-protection mechanism
• Smaller size devices, such as flash drives make them easier to lose
• Currently costs a lot more per gigabyte than traditional hard drives for large storage capacities.
• May require a special version of a program to run on a flash-based drive to protect from prematurely wearing out the drive.
With that I would end this blog. I'm really sorry that I can't give you my orignal content.
Thank you
🔥😂
