ZSJL] Galaxy S10 (SM-G97xF) OFFICIAL OneUI2/10 beta

[NomanAhmed]

This thread is for the INTERNATIONAL S10e / S10 / S10+, SM-G97xF, only!!!

Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )

If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!

Samsung is starting a Beta-program Android 10/OneUI 2 for the S10-series. In this thread, we'll post the UPDATE.ZIP files (when available).

REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!

The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the G97xFXXS3ASII build! (Radio/CP & CSC must be on ASIE)

The UPDATE.ZIP can be installed on devices with the following CSC's:

SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )

single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA

ADB-method:
1. Download SDK platform tools from here

https://developer.android.com/studio/releases/platform-tools

. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip

The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.

SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.

This will not trip KNOX if done by the method i told

NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build

[NomanAhmed]

NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...

S10+:



Beta2 (25 Oct) ZSJ8 -> ZSJF: G975F_ZSJ8_ZSJF

http://fota-secure-dn.ospserver.net/firmware/DBT/SM-G975F/nspx/7a45a0bee44841368a47166ddf8fb0c6.bin?...

Needs to be installed with the "SD-Card method"!

EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL:

http://fota-secure-dn.ospserver.net/firmware/DBT/SM-G975F/nspx/eb2e388837b2496da3fdc331e52c38fd.bin?...

S10:


Beta2 (25 Oct) ZSJ8 -> ZSJF:

http://fota-secure-dn.ospserver.net/firmware/DBT/SM-G973F/nspx/29065d1f7f4b4c84b81e32a095035af3.bin?...

Needs to be installed with the "SD-Card method"!

EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: 

http://fota-secure-dn.ospserver.net/firmware/DBT/SM-G973F/nspx/216d991185a54bea9b28cfdce07ca5cc.bin?...

S10e:



Beta2 (25 Oct) ZSJ8 -> ZSJF: 

http://fota-secure-dn.ospserver.net/firmware/DBT/SM-G970F/nspx/5da7dee7c69341dca6f0cab820fd8447.bin?...

Needs to be installed with the "SD-Card method"!

EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: 

http://fota-secure-dn.ospserver.net/firmware/DBT/SM-G970F/nspx/23423b7d40f64555b4cf039eab612d0c.bin?...

RENAME THE FILE TO update.zip

NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)

If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... 
 )

UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory

[BilawalSarfraz]

Hello Community Peoples,
Be Aware!
Kindly Note,as the person says that this method is only for International Devices,kindly don't apply it on Pakistan Region Devices. Also if your phone is under warranty then warranty will be void and because of this Samsung is not responsible for your device.
Samsung Introduce its One Ui 2.0 beta version in Just Few Devices. So,it takes some times to make it stable and then they will release it Officially in All over the World.
For Q and A please read below:
1) Is it possible to get the latest One UI 2.0 beta on my phone?
A) Yes, Maybe. Kindly Note that Samsung is not Responsible for any Damage that you maked with your device. Don't make any custom modifications with your phone,if you maked then there is 98 percent chances that you may not get the OTA Stable version.
2) Is it stable,fast and secure?
A) It is just Fast not too much stable and secure. It is in Beta testing,so bugs might exists.
3) What is Beta Testing Program?
A) Beta testing program is just build for testing the Program before it uploads Globally and if any bugs exist,then Developers fix it. Also it is for limited time only.
4) What is the difference b/w Stable and Beta builds?
A) According to Stable Build:
It is fast and secure. Also doesn't contains high level bugs, if any small bugs found then the developers will fix it and then push the OTA of that Model of Phone.
According to Beta Build:
It is fast but not too much secure. It contains many bugs as compared to Stable. Also it is only for Limited Region. When the Beta build become Stable then the Developers Publish it and then it will become available for All Samsung Phones.
I hope you guy's understand what I am trying to saying.
Don't put your phone's Life at Risk.
When Ever the Beta become Stable then the Company will release it for Every Samsung Models. Don't Modified your original OS.
Take Care.
Regards,
Bilawal Sarfraz

[Shaheryar_Ashfaq]

can i install it?

[NomanAhmed]

yes you can but ready the guide and everything carefully before installing

[NomanAhmed]

and double check everything before installing

[Shaheryar_Ashfaq]

getting error
couldn't mount SD CARD
should i try adb method?
s10 plus

[Shaheryar_Ashfaq]

tried adb method it gives status 7 error

[Shaheryar_Ashfaq]

tried adb and sd card method
in sd card it says cant mount sd card
in adb verification goes to 40 and then gives status 7 error
tried another link of beta 1 as well but same results

[NomanAhmed]

can you send me the adb error log ?